Description
OSHA Table 1 lets you use a handheld saw on concrete without exposure monitoring — but only if the saw has an integrated water delivery system that continuously feeds water to the blade. On a jobsite with no standpipe and no tank, that requirement is what stops the work.
A pressurised tank solves a compliance problem
This bottle is a hand-pumped pressure vessel with a hose and a control valve, feeding water to a cut-off saw or a masonry saw wherever there is no supply. Pump it up, open the valve, and you have continuous flow at the blade for the length of a typical cut sequence.
What it buys you beyond dust
- Silica control — respirable crystalline silica is suppressed at the source rather than filtered afterwards.
- Blade life — running wet typically returns two to three times the life of the same blade run dry.
- A cleaner cut — less heat means less chipping and no burn line on finished material.
Using it well
Clean water only; grit in the tank blocks the valve. Set the flow so the slurry runs off milky rather than sprayed everywhere — you need enough water to cool the rim, not a flood. Refill before the pressure drops, because an interrupted feed on a continuous-rim blade does damage quickly. The compliance detail sits in our OSHA Table 1 explainer. See also accessories and parts.
Reviews
There are no reviews yet.